Rompetubos Hidrostático Maxi-T
Rompetubos Hidrostático Maxi-T
Designers note:
“Designed for replacing larger sewer pipes between service shafts and small excavations”
“Designed for replacing larger sewer pipes between service shafts and small excavations”
- 60 metric tons of pulling power
- Ø80 mm. → Ø400 mm. operational range
- Pipe materials: Can operate in all known pipe materials
Support Plate
Radius 500 mm. Positioned between the concrete shaft-wall and the pulling unit during installation.
Hydro-Static Extractor Frame
The hydraulic device extracts the bursting head and new product pipe from the ground, - here shown inside a Ø1000 mm. service shaft (1:1)
Barras sólidas de acero
Material compuesto de alta calidad del modelo Mini-T, diseñado para un alto margen de seguridad.
Fuente de energía hidráulica
Fuente de energía, motor diésel de 21 CV. Presión op. de 250 bar.
Características técnicas
| Pulling unit | Power pack | Steel rods | |
|---|---|---|---|
| Pulling force | 47 metric tons ( 103600 lbs. ) | ||
| Measurements | 160 x 45 x 50 cm. ( 63 x 17.7 x 19.7 inch. ) | 120 x 110 x 120 cm. ( 47.2 x 43.3 x 47.2 inch. ) | Ø45 mm. x 1.00 meter. ( 1.77 x 39.4 inch. ) |
| Weight | 600 kg. ( 1322 lbs. ) | 820 kg. ( 1807 lbs. ) | Ø45 steel rod: 12 kg. ( 26 lbs. ) |
| Engine | Kubota 3-cyl. diesel 22 bhp. / 16.40 kW. Fuel cap. 35 ltr. ( 9.25 gal. ) Fuel consumption: 5 ltr. / hr. ( 1.3 gal. / hr. ) | ||
| Hydraulic system | 3 cylinders | Max 250 bar. ( 3625 psi. ) Pump. 1: 35.0 ltr. / min. ( 9.25 gal. / min. ) Pump. 2: 22.5 ltr. / min. ( 5.95 gal. min. ) Variable pump flow: < 70 bar. → 57.5 ltr. / min. ( < 1015 psi. → 15.2 gal. / min. ) > 70 bar. → 22.5 ltr. / min. ( > 1015 psi. → 5.95 gal. / min. ) Hydraulic oil cap. 85 ltr. ( 22.45 gal. ) | |
| Operational speed | Up to 1,0 meter. / min. ( 3.3 ft. / min. ) | ||
| Operational range, Existing pipe diameter | Ø50 mm. → Ø250 mm. ( 2 → 10.0 inch. ) |